Stair


Lightess Solar Stair Lights Outdoor LED Step Lighting 2 LEDs Stainless Steel For Steps Paths Patio Decks Pack of 6

Description:
This modern LED solar stair light is fantastic for lighting, decorating and marking. It can be easily mounted either vertically or flatly on staircases, paths, gardens, mailboxes, decks, docks and fences. The battery enables the light to run up to 9 hours through the night and recharge automatically during the day.
Specifications
Solar Panel: Monocrystalline silicon solar panel
LED Type: Floodlight
Light Color: White
Lumen: 10~12
Battery: 1.2V/600mAH AAA Ni-MH
Material: Stainless Steel +ABS+ PC
Product Dimension: 3.9*0.9*3.3 inches
Unit Net Weight: 1.2 Lbs
Package Includes
6 x Solar Powered LED Light
6 x Screw Set
1 x English User Manual
Note:
1. Please put the light under the standard sunlight 6 to 8 hours before using it.
2. Working power of the solar panel will be influenced by weather, location etc.
3. Get charged only when switched to “ON”.
4. Waterproof in rainy and wet conditions, but don’t dip it intentionally in water.

read more


Wall Eye II – 12 volt COOL (4000 K) 2 watt CMD Flat LED – Low-Voltage Landscape Light for Retaining Wall, Column & Stair Night Time Safety Illumination – Black Powder Coated Housing

For Wall, Column and Stair Illumination * Long Lasting LED’s – No more burned out bulbs to replace. * Economical – 40,000 Hour Life (almost 14 years @8 hrs lit per day). * Low Power – 2 Watts per unit (2) 1-watt Phillips CMD LED’s. * Durable Construction – Powder Coated Black 304 Stainless Steel will not Rot or Rust. * Can also be used in salt spray applications. * Weather Resistant – Sealed and Rust proof, ideal for Outdoor Use. * SAFE – Cool to the touch … Very low burn risk. * Long Wire – 72″ (182 cm) Lead with UL/18-2 SPT Low Voltage Cable (UL Rated) and 3/8″ (1 cm) Stripped and tinned (soldered) for easy connections to power feed cable to fit through a ¼” hole. * Easy to Install – Simply slip under the cap stone on Block Walls, Columns or Stairs (Before gluing down cap). * Versatility – Use with Steps, Walls, Columns or Counter Tops. * Connects to any 12 Volt AC or DC Transformer. *Lightweight but super strong @ 6.5 oz each. * No more wasted block from cutting and chiseling like needed for some light fixtures installations! * Installs in Minutes under coping- NO Cutting and NO Drilling! * Each Phillips LED Unit has (2) 1-Watt flat CMD’s (Latest Technology) COOL White LEDs producing 27 lumens @4000 Kelvin with a built in driver/rectifier. Optimum Voltage is 12 v AC but will operate in a range voltage from 8-12.5 v AC. The weather sealed LED unit is secured by two 3mm x 10mm stainless steel studs with two stainless steel nuts. * Space fixtures from 36″ to 72″ apart (depending upon amount of lighting desired). * Fixture measures: 5 9/16″ (15 cm) Wide x 3 1/8″ (8 cm) Deep x 1/32″ (1 mm) Thick LED unit and the flange sticks out 5/8″ (2 cm) from the mounted surface with a 1/2″ (1.25 cm) reveal. NEW DESIGN: To retrofit lighting into existing installations easily. The Wall Eye II installs into your masonry crack with a simple 7″ circular saw with a masonry blade to create the mounting space and a 1/4″ masonry bit to feed the wire through.

read more


Wall Eye II – 12 volt COOL (4000 K) 2 watt CMD Flat LED – Low-Voltage Landscape Light for Retaining Wall, Column & Stair Night Time Safety Illumination – Brushed Stainless Housing

For Wall, Column and Stair Illumination * Long Lasting LED’s – No more burned out bulbs to replace. * Economical – 40,000 Hour Life (almost 14 years @8 hrs lit per day). * Low Power – 2 Watts per unit (2) 1-watt Phillips CMD LED’s. * Durable Construction – Brushed 304 Stainless Steel will not Rot or Rust. * Can also be used in salt spray applications. * Weather Resistant – Sealed and Rust proof, ideal for Outdoor Use. * SAFE – Cool to the touch … Very low burn risk. * Long Wire – 72″ (182 cm) Lead with UL/18-2 SPT Low Voltage Cable (UL Rated) and 3/8″ (1 cm) Stripped and tinned (soldered) for easy connections to power feed cable to fit through a ¼” hole. * Easy to Install – Simply slip under the cap stone on Block Walls, Columns or Stairs (Before gluing down cap). * Versatility – Use with Steps, Walls, Columns or Counter Tops. * Connects to any 12 Volt AC or DC Transformer. *Lightweight but super strong @ 6.5 oz each. * No more wasted block from cutting and chiseling like needed for some light fixtures installations! * Installs in Minutes under coping- NO Cutting and NO Drilling! * Each Phillips LED Unit has (2) 1-Watt flat CMD’s (Latest Technology) COOL White LEDs producing 27 lumens @4000 Kelvin with a built in driver/rectifier. Optimum Voltage is 12 v AC but will operate in a range voltage from 8-12.5 v AC. The weather sealed LED unit is secured by two 3mm x 10mm stainless steel studs with two stainless steel nuts. * Space fixtures from 36″ to 72″ apart (depending upon amount of lighting desired). * Fixture measures: 5 9/16″ (15 cm) Wide x 3 1/8″ (8 cm) Deep x 1/32″ (1 mm) Thick LED unit and the flange sticks out 5/8″ (2 cm) from the mounted surface with a 1/2″ (1.25 cm) reveal. NEW DESIGN: To retrofit lighting into existing installations easily. The Wall Eye II installs into your masonry crack with a simple 7″ circular saw with a masonry blade to create the mounting space and a 1/4″ masonry bit to feed the wire through.

read more


Wall Eye II – 12 volt COOL (4000 K) 2 watt CMD Flat LED – Low-Voltage Landscape Light for Retaining Wall, Column & Stair Night Time Safety Illumination – Gray Powder Coated Housing

For Wall, Column and Stair Illumination * Long Lasting LED’s – No more burned out bulbs to replace. * Economical – 40,000 Hour Life (almost 14 years @8 hrs lit per day). * Low Power – 2 Watts per unit (2) 1-watt Phillips CMD LED’s. * Durable Construction – Powder Coated Gray 304 Stainless Steel will not Rot or Rust. * Can also be used in salt spray applications. * Weather Resistant – Sealed and Rust proof, ideal for Outdoor Use. * SAFE – Cool to the touch … Very low burn risk. * Long Wire – 72″ (182 cm) Lead with UL/18-2 SPT Low Voltage Cable (UL Rated) and 3/8″ (1 cm) Stripped and tinned (soldered) for easy connections to power feed cable to fit through a ¼” hole. * Easy to Install – Simply slip under the cap stone on Block Walls, Columns or Stairs (Before gluing down cap). * Versatility – Use with Steps, Walls, Columns or Counter Tops. * Connects to any 12 Volt AC or DC Transformer. *Lightweight but super strong @ 6.5 oz each. * No more wasted block from cutting and chiseling like needed for some light fixtures installations! * Installs in Minutes under coping- NO Cutting and NO Drilling! * Each Phillips LED Unit has (2) 1-Watt flat CMD’s (Latest Technology) COOL White LEDs producing 27 lumens @4000 Kelvin with a built in driver/rectifier. Optimum Voltage is 12 v AC but will operate in a range voltage from 8-12.5 v AC. The weather sealed LED unit is secured by two 3mm x 10mm stainless steel studs with two stainless steel nuts. * Space fixtures from 36″ to 72″ apart (depending upon amount of lighting desired). * Fixture measures: 5 9/16″ (15 cm) Wide x 3 1/8″ (8 cm) Deep x 1/32″ (1 mm) Thick LED unit and the flange sticks out 5/8″ (2 cm) from the mounted surface with a 1/2″ (1.25 cm) reveal. NEW DESIGN: To retrofit lighting into existing installations easily. The Wall Eye II installs into your masonry crack with a simple 7″ circular saw with a masonry blade to create the mounting space and a 1/4″ masonry bit to feed the wire through.

read more


Wall Eye II – 12 volt COOL (4000 K) 2 watt CMD Flat LED – Low-Voltage Landscape Light for Retaining Wall, Column & Stair Night Time Safety Illumination – Brown Powder Coated Housing

For Wall, Column and Stair Illumination * Long Lasting LED’s – No more burned out bulbs to replace. * Economical – 40,000 Hour Life (almost 14 years @8 hrs lit per day). * Low Power – 2 Watts per unit (2) 1-watt Phillips CMD LED’s. * Durable Construction – Powder Coated Brown 304 Stainless Steel will not Rot or Rust. * Can also be used in salt spray applications. * Weather Resistant – Sealed and Rust proof, ideal for Outdoor Use. * SAFE – Cool to the touch … Very low burn risk. * Long Wire – 72″ (182 cm) Lead with UL/18-2 SPT Low Voltage Cable (UL Rated) and 3/8″ (1 cm) Stripped and tinned (soldered) for easy connections to power feed cable to fit through a ¼” hole. * Easy to Install – Simply slip under the cap stone on Block Walls, Columns or Stairs (Before gluing down cap). * Versatility – Use with Steps, Walls, Columns or Counter Tops. * Connects to any 12 Volt AC or DC Transformer. *Lightweight but super strong @ 6.5 oz each. * No more wasted block from cutting and chiseling like needed for some light fixtures installations! * Installs in Minutes under coping- NO Cutting and NO Drilling! * Each Phillips LED Unit has (2) 1-Watt flat CMD’s (Latest Technology) COOL White LEDs producing 27 lumens @4000 Kelvin with a built in driver/rectifier. Optimum Voltage is 12 v AC but will operate in a range voltage from 8-12.5 v AC. The weather sealed LED unit is secured by two 3mm x 10mm stainless steel studs with two stainless steel nuts. * Space fixtures from 36″ to 72″ apart (depending upon amount of lighting desired). * Fixture measures: 5 9/16″ (15 cm) Wide x 3 1/8″ (8 cm) Deep x 1/32″ (1 mm) Thick LED unit and the flange sticks out 5/8″ (2 cm) from the mounted surface with a 1/2″ (1.25 cm) reveal. NEW DESIGN: To retrofit lighting into existing installations easily. The Wall Eye II installs into your masonry crack with a simple 7″ circular saw with a masonry blade to create the mounting space and a 1/4″ masonry bit to feed the wire through.

read more


ideas4landscaping-popup